The name “Eggscape” effectively captures the essence of the project, which involves using eggshell-based biodegradable bricks to create a living wall system designed to enhance urban greening. The term “Eggscape” combines “egg,” referencing the primary material used, and “scape,” suggesting the transformation of urban landscapes through innovative design.
This system includes two types of bricks: biodegradable eggshell-based bricks and metal wireframe bricks. Together, these have the potential to form a flexible, modular system that supports plant growth and structural stability.
These bricks are designed to support the growth of algae, moss, and other vegetation, enhancing urban sustainability by reducing the need for irrigation and maintenance. The system’s significance lies in its ability to improve stormwater management and reduce pollutants like CO2 and nitrogen, contributing to more resilient urban environments.
Haneen Othman
Prep = 10 minutes
Making = 45 minutes
Drying = 48 hours
4/10
1. Measure all the ingredients before starting.
2. Assemble the molds and tap the sides for extra support. (You can add a releasing agent, like cornstarch or a similar option, to the molds.)
3. Soak the hibiscus in 100 ml of warm water and set it aside.
4. Add the gelatin and the remaining water to a saucepan.
5. Place the saucepan on low heat (around 150°F). Do not bring it to a boil.
6. While the saucepan is heating, blend the soaked hibiscus and its water in a grinder for a few seconds. Avoid fully grinding it—the texture should remain slightly rough to achieve the desired outcome.
7. Add the eggshells and beet powder to the saucepan and mix thoroughly until well combined.
8. Stir in the hibiscus mixture and mix well.
9. Pour about half an inch of the mixture into the molds. Shake and tap the molds firmly on a hard surface to remove air bubbles.
10. Gradually pour the rest of the mixture in increments, shaking and tapping after each pour.
11. Work quickly, as the mixture cools and the gelatin hardens rapidly.
12. Slightly overfill the molds, as the material shrinks as it dries.
